Cleaning solutions at IMTS 2018
Cleaning Technologies Group will introduce a host of advanced cleaning solutions at the IMTS 2018 in, September 10 - 15, 2018 in Booth (#121513). Among the new technologies exhibited at the show will be:
GMC stainless-steel ultrasonic cleaning system: The stainless-steel GMC is an optional package to achieve chemical compatibility with aggressive caustic and acidic agents. The GMC series comes in two sizes: the GMC1818 and the GMC 3523. The larger can accommodate parts with one dimension up to 35 inches and weighing up to 125 pounds. Both units are completely self-contained, supported on casters, and operate from commonly available power supplies making them easy to move where needed for either in-place or utility cleaning. Both systems include a pump and dual stainless cartridge filtration, a surface sparger, automated controls for heat, pump and ultrasonics, a lid, and one standard basket. A drip pan (the open hinged lid in the case of the GMC 1818 or attached to the side of the tank in the case of the GMC 3523) allows for draining one basket of parts, while cleaning another.
Rotosonic combination cleaning system: The Rotosonic (patent pending) will clean heavily soiled parts in a single machine rather than having to purchase a spray cabinet and an ultrasonic machine separately. It gives the ultimate in flexibility as you can either perform a single process or both, depending on your needs. The machine has a compact design and eliminates the manpower needs and safety risks of moving parts from washer to washer.
Aquarius: Combining ultrasonic cleaning with rinsing, drying, and other processing steps in a unitized cleaning console helps assure process integrity. The addition of an automated, robotic transfer, environmental enclosure, and DI water systems increases cleanliness levels and provides process consistency while significantly reducing the labor required for parts cleaning.
Aquarius series multi-tank ultrasonic cleaning systems are pre-engineered to meet a wide range of parts cleaning needs at an attractive price. This platform can also be featured to handle your nitric or citric acid passivation requirements.
Lean-Jet RB-2: This aqueous immersion cleaning system uses a triple-action washing and rinsing process consisting of agitation, spray impingement, hydraulic purging through immersion and rotation, ultrasonics, and heated blow-off drying. The triple-action batch cleaning process was specifically developed to process a broad range of challenging parts, especially those with internal bores, passages and complex geometries, making this system capable of meeting critical cleaning expectations.
LeanVeyor: The LV conveyor parts washing system is engineered for lean manufacturing, while reducing floor space requirements and providing exceptional cleaning and drying performance. We use a common-sense approach to component choice and placement for quick and efficient service and access. All stages are insulated and compartmentalized with individually adjustable exhaust dampers, reducing system heat loss.
The entire unit has been engineered and manufactured from the ground up to be flexible, durable, simple to operate, and easy to maintain. The LeanVeyor can process on a flatwire belt or custom fixture. Optional ultrasonic states can be added along with loading and unloading automation.
LeanJet Cell-Jet: An excellent cabinet washer for point of use, as well as batch cleaning where very little floor space is available. This spray washer was designed as a low cost, down and dirty, industrial quality wash station using medium pressure spray impingement and compressed air to clean and dry your parts.