Kent, Washington – Utilizing advanced high precision linear encoders, innovative vibration isolation, and proven software control systems, OMAX's MicroMAX JetMachining Center is capable of a positioning accuracy of less than five microns while retaining all the advantages of abrasive waterjet machining. The MicroMAX JetMachining Center cuts no heat-affected zone (HAZ), so no secondary processing is required. The MicroMAX JetMachining Center can machine stainless steel, titanium, carbon fiber, PEEK, glass, nitinol, graphite, copper, composites, laminates, and more, with high precision and smooth finishing, for either prototyping or production.
- Equipped with precision 7/15 Mini MAXJET 5 Nozzle
- Vibration isolation of table and gantries
- A work envelope offering an X-Y cutting travel of 24" x 24" (610mm x 610mm)
- Very high precision with 0.1 micron linear optical encoder system
- Highly rigid structure with low mass bridges and carriages
- Optional micro Tilt-A-Jet for taper elimination
- Vibration isolation of table and gantries
- Motorized Z-Axis for precision nozzle height positioning
- All components have matched thermal expansion
- Equipped with 7/15 Mini MAXJET 5 Nozzle
- Revolutionary patent-pending process for fine abrasive feed rate
- Full enclosure with environmental controls
- Advanced pressure controls for piercing delicate materials
- Machines a wide range of materials with high accuracy
- No heat-affected zones or mechanical stresses
- Leaves behind a satin-smooth edge, reducing secondary operations
- Stiff construction greatly reduces vibration and increases accuracy
- Easily cut non-conductive and reflective materials
- Can machine hardened steel as easily as annealed steel
- Full enclosure provides quiet and clean operation below 80db
Optional accessories
- 7/15 Mini MAXJET5 nozzle
- Chiller system
- Laminar filter
- Laser feature finder
- MAXJET5 water only nozzle
- MAXJET5i MiniJet nozzle
- MAXJET5i nozzle
- Motorized Z-axis
- Reverse osmosis system
- Water recycling system
Source: OMAX