Production efficiency has been increased at DMG MORI Manufacturing USA’s (DMM) new location in Davis, California, enhancing manufacturing capabilities by investing in new equipment while consolidating production. Production at DMM’s 3601 Faraday Ave. location includes horizontal milling technology, automation, and DMG MORI’s Software Technology Solutions providing digitization solutions.

DMM has consolidated all production without eliminating any capabilities from their previous location. With the near $1 million investment, DMM has enhanced their production with future growth goals in mind to provide innovative solutions to customers.

“Investing in DMG MORI Manufacturing USA’s growth was essential and now enables the production of future innovations,” says Kazutoyo Moriguchi, president DMG MORI Manufacturing USA Inc. “In order to continue to provide the cutting-edge solutions that we are so proud of, a restructure and an investment was needed.”

DMM local production of technology, automation, and digitization solutions includes:

Technology – NHX 4000 3rd Gen, NHX 5000 3rd Gen, NHX 5500 2nd Gen, NHX 6300 2nd Gen,

NHX 8000 2nd Gen, ALX 2500, ALX 2000 and CMX 1100 V.

Automation – Rotary Pallet Storage (RPS), Compact Pallet Pool (CPP) and Linear Pallet Pool (LPP) – NHX, Gantry – ALX and MATRIS – CMX V.

Digitization – my DMG MORI, your customer portal, an online service manager which allows 24/7 access to service, machine documents, and Messenger, DMG MORI’s machine monitoring platform.

Customers are encouraged to work with their local DMG MORI USA ASM to schedule a visit to the new, official DMG MORI Manufacturing USA production plant in Davis.

Driven by technological advancements, demand for medical implantable devices (MIDs) is growing from a wider application of diverse clinical needs, increasing incidence of cardiovascular diseases, and an expanding geriatric population. Early pacemakers, for example, had a battery life of only three hours. Now, more than a million pacemakers are implanted annually, each designed to function 20 years or longer.

To respond to these developments, manufacturers must use new tools and techniques to scale up production of ever smaller and more sophisticated devices with durable, hermetic seals, while maintaining stringent quality standards. The essential process of laser welding of titanium casing presents especially difficult challenges.

© Amada Weld Tech | https://amadaweldtech.com/

Laser welding for hermetic sealing
Laser welding plays a critical role in the manufacturing of MIDs. While many of the internal components of MIDs can be joined by soldering, brazing, or welding, the entire device is often packaged in two titanium parts (shells), with laser welding serving as the preferred method for hermetically sealing the two shells. These joints are often referred to as “helium leak tight,” meaning they will pass a leak test using helium gas.

In addition, laser welding is also used to hermetically seal internal components of more complex devices, such as pumps, pressurized gas cylinders and fluid containers. The number of welds varies according to layout of the device, but a single infusion pump, for example, can require 40 different welds.

Typical laser welding procedure
The closing of the titanium shells has traditionally been performed by seam sealing with Pulsed Nd-YAG lasers. A continuous wave (CW) laser isn’t used to avoid transferring too much heat inside the device.

Before the seam sealing can take place, the two shells must be positioned, clamped and pre-tacked with small laser welds for a temporary or green strength fixation. The system required for this pre-tacking is known as a laser pre-tacker.

Argon atmosphere
When sealing titanium shells, not only is the hermeticity of the package important, but also the specified internal atmosphere of the welded device must be guaranteed because it will be permanently contained within the device.

For pacemakers, a dry argon atmosphere is preferred, allowing the titanium to be laser welded in an inert atmosphere. Argon is also suitable for long-term proper functioning of the device. A percentage of helium is commonly added to facilitate the detection of leaks in subsequent product testing.

Laser welding of such devices is therefore relatively simple because the pacemaker can be entirely hermetically sealed in a glovebox system containing argon or a mix of argon-helium. This gas atmosphere will be the same on the outside and the inside of the device.

Nitrogen atmosphere
Laser welding of devices containing nitrogen is more difficult. For devices, such as defibrillators which work with a much higher internal voltage, dry nitrogen is the most suitable gas for the internal atmosphere. Argon has a lower ionization potential and can cause internal sparking, whereas Nitrogen is the best gas for ensuring that the internal ionization potential is at the desired level.

However, seam-sealing titanium by means of laser welding is not possible in a nitrogen atmosphere, because it will generate hard and brittle titanium nitrides. Devices containing nitrogen are therefore designed with a filling hole. Prior to introducing the nitrogen, the device is laser welded in argon and placed outside the glovebox. The argon is then pumped out, and the device is backfilled with nitrogen through a small-diameter filling hole. This filling hole is subsequently sealed with a single-spot laser weld.

New capabilities in laser welding of MID titanium casing
As MID technology rapidly evolves, and as manufacturers seek higher levels of throughput, quality and profitability, laser systems companies specializing in this area are continually responding by developing new capabilities. For example, AMADA WELD TECH, has developed several laser welding innovations that allow MID manufacturers to simplify and automate manufacturing processes, eliminate the need for destructive testing, conserve energy, and reduce gas consumption.

Adapting to thin-gauge titanium
For instance, automation is enabling MID manufacturers to more easily handle the thinner gage and varying thickness of the materials used in new devices such as smaller and leadless pacemakers. The weld spot size needs to be adjusted to fit variable material thickness. Some laser systems do this by the changing of the optical elements in the delivery optic (‘weld head’). This is a technically sound method, but such an intervention may require elaborate re-qualification of the system.

More advanced systems feature motorized spot size changers engineered specifically for MID welding in glovebox environments. This feature makes changing spot size as simple as hitting a key, and or the spot size can be programmed in the CNC motion system.

Gas atmosphere control
MID manufacturers are improving profitability and throughput by better controlling gas consumption and by reducing or eliminating the need for the destructive testing of welded devices to validate their internal atmosphere. The first step is using only high-quality glove boxes with low leak rates and good gas recirculation/scrubbing and a solid particle cleaning system. Laser systems with an active gas monitoring and mixing unit can optimize the replenishment of the gas, further lowering gas consumption. Active monitoring of the gas on moisture, oxygen levels, helium percentage and hydrogen ensures the correct atmosphere in every unit produced.

Automatic weld seam alignment
Another way MID manufacturers are improving profitability and throughput is by automating the seam alignment process, and thereby reducing operator input/costs, improving quality, facilitating traceability of production, and optimizing throughput of a system. When alignment is not automated, the weld seam is typically accurate, but a perfect weld result depends on the operator to compensate for the tolerance in the geometry of the stamped parts. Advanced systems automate this process by image-based camera vision systems with algorithms to detect the seam and align the part.

Tool-less clamping
The production process can also be simplified though “tool-less clamping.” Traditionally, the clamping of shells has been performed with a custom set of tools which have a cavity that follows and supports the outside geometry of the shells. These tools are also referred to as “tooling nests” and the method is known as “clamping with tools.” For this method to work, the tools must be perfectly shaped, as they determine the end product alignment and subsequent joint quality. The corresponding tools need to be exchanged when welding a product mix of devices with different designs.

As an alternative, tool–less clamping replaces dedicated tooling. The parts are clamped between two much simpler geometrical shapes – normally simple flat plates. This simplifies the system. However, this method requires more from the MID and its titanium shells as the shape and positioning of the two shells relative to each other are determined by the MID and not by external tooling. There’s nothing to force the MID shells into a certain position and form.

Laser weld part programming and optimization with PSO
The organic shape of the circumference of a pacemaker means 5-axis simultaneous motion is required to create a seam weld. Traditional systems rotate the pacemaker at a constant angular speed. The linear speed over the length of the weld seam fluctuates. If a laser is fired at a constant repetition rate, the distance between the individual weld spots fluctuates. This can result in overheating of some parts of the seam, typically the sharp corners of the MID. Additionally, the weld speed in all other areas will be slower than would be possible using this welding process. Both the MID package quality and system throughput are suboptimal.

These issues can be solved by means of position synchronized output (PSO). This system triggers the laser based on a defined movement of the part (vector displacement). This keeps the pulse-to-pulse distance constant and the heat load on the weld seam which maximizes the weld speed. A significant throughput increase is the result. This system is also referred to in literature as (laser) “fire on demand.”

Laser welding monitoring
Advanced laser systems provide real-time weld quality control by an automated weld monitor that is fast enough to work at the same time as the laser is emitting laser light and provide immediate feedback to the system and operator. A laser weld monitor is normally integrated within the system itself. The monitor measures the infrared radiation emitted from the weld and compares it to good welds. It uses algorithms that “draw a parameter window” around the signal from a good weld, and compares the measured signal in real time, at a high frequency.

Looking forward
As the medical implantable device industry continues to evolve and expand, manufacturers will be best served by laser system providers who focus on their very specialized requirements.

SLM Solutions invites the industry to a game-changing product launch on June 23 at 5pm CEST. The launch will take place digitally and will be accessible to everyone at https://www.slm-solutions.com/the-big-launch. The new product empowers the creation of metal components with previously impossible designs and unmatched productivity, reducing overall material usage and minimizing the end-part cost to achieve industrial-scale production.

Sam O'Leary, CEO of SLM Solutions, is enthusiastic about the upcoming product launch "Last year we introduced an industry gamechanger – the NXG ll 600 – but we won't stop there. Today, after three years in the making and care of many of the world's most visionary engineers, we are proud to add a new technology to our portfolio."

The groundbreaking product has a record impact on part design and increases the productivity of the entire process by reducing powder consumption and scrap and shortening post-processing times. Likewise, improved thermal management will significantly shorten the build time while substantially reducing part stress. As a result, a surface finish like no other will soon be the new norm.

And – like almost everything they bring to life – it's holistic. On this topic, O'Leary adds, "Why is it is available for most systems in our portfolio? Because we strive to make every new piece of technology meet the demands of every priorly-built machine. We believe that creating truly open architecture is the only way to bring additive manufacturing to its powerful potential."

What's more, the technology's basic subscription will be completely free of charge. O'Leary explains, "The goal is to be relentless in innovation. It's free because we want to empower our partners and customer base. Why should this remain an enablement of just a few when it can benefit all?".

O'Leary concludes that "This new technology is another milestone, not only for us but for the entire industry. As a high-tech company, we are once again shaping the face of additive manufacturing with this product launch. It's the next disruption in the manufacturing industry, so it's worth attending."

What does the next disruption of additive manufacturing look like? SLM Solutions' industry experts will explain on June 23 at 5pm CEST at the online product launch that includes an open discussion. Participation is free of charge.

U.S. Manufacturing Technology Orders totaled $404.6 million in April 2021, a decline of 12% from March 2021 but an increase of 72% from April 2020, according to the latest U.S. Manufacturing Technology Orders report published by AMT – The Association For Manufacturing Technology. Total orders for 2021 reached $1.57 billion YTD, an increase of 40% over orders placed in the first four months of 2020.

“April 2020 had the lowest orders in a decade, but the previous three months were business as usual, so to be 40% up over the previous year shows the real strength of the industry in 2021,” says Douglas K. Woods, president of AMT. “Parts that would normally go to job shops are now being produced in-house by larger manufacturers with the means to increase their production capacity. This is not to say production is shifting away from job shops; they are still operating at near capacity and increasing machine orders month over month, but increased consumer demand has necessitated more capacity, and confidence in the sustainability of that demand has justified the capital expenditure by large OEMs. As a result, our members have seen a resurgence of multi-machine orders near 2018 levels.

“There has been strong demand for metal cutting technologies in 2021, and orders for new forming technologies have more than doubled where they were at this point in 2020. Cosmetic automobile design changes drove increases in forming technologies and helped spur demand for cutting technologies from the mold and die industry. April orders were further strengthened by energy exploration and mining expanding out of Texas into nearby regions in response to increased market prices. Industries related to consumer products also increased orders in April, such as off-road vehicle manufacturing, electrical equipment manufacturing, and commercial and service industry machinery.

“Another optimistic sign for the industry is the number of open houses our members report having over the past few weeks where attendance has exceeded their expectations. This signals a renewed comfort with in-person sales calls and a pickup in regular maintenance as opposed to emergency visits. However, supply constraints have meant new orders are being added to an already growing backlog. The demand for manufacturing technology is there, and the suppliers who can deliver on orders will be in a position to one-up their competition in the near term.”