
The Tsugami BW329Z Swiss-type lathe uses its 3-path control system and dual independent gang slides to quickly produce complex parts. With a horizontally opposed gang tool layout and the ability to use three tools in the cut – two on the main spindle, one on the sub-spindle – this machine offers a short tool-to-tool path and fast chip-to-chip time.
The Y-axis and 8 live tool positions on the sub-spindle tool post allow milling operations, traditionally performed on the main spindle, to be performed on the sub-spindle internal to the cycle time. Other features include 60mm Z-stroke on the rear gang slide, integral spindle motors, and an integral drive guide bushing motor for fast acceleration/deceleration times and quick C-axis positioning.
Tsugami America
https://www.tsugamiamerica.com

The stats
- Two gang type tool posts on independent slides enable independent back side machining, simultaneous end-milling, balanced turning with front/rear posts
- Simultaneous 3-Path System control enables overlapping machining, including superposition control
- Cycle time reduction – Independent slides enable pre-positioning of the next tool
- Intelligent high-speed spindles detect tool breakage by motor load, eliminate mechanical detector
- 29 tool positions
- 330mm stroke (direct rotary guide bushing)
- Max rapid traverse rate of 35m/min
- Fanuc 31i-B CNC
- Convertible – run without guide bushing with installation of chucker kit

Explore the June 2023 Issue
Check out more from this issue and find your next story to read.
Latest from Today's Medical Developments
- How to lower manufacturing costs for medical devices
- Close out July with our Lunch + Learn on medical machining solutions
- Research center developing digital twins for manufacturing
- Build your Controlled Unclassified Information (CUI) toolkit
- Kitov AI Inc., FANUC America partner to advance AI-driven smart manufacturing solutions
- Discover cutting-edge machining at SW North America's Open House
- Maximize efficiency: ROBOGUIDE V10's high-performance upgrades
- #47 Lunch + Learn Podcast with INSACO