The DS-30 Series Y-axis turning centers from Haas Automation combine dual-spindle turning with Y-axis, C-axis, and live tooling to create “done-in-one” machining solutions for any shop. The opposed spindles support fully synchronized turning, and allow on-the-fly part pass-off to reduce cycle times. The machines come standard with high-torque live tooling and a servo-driven C-axis, and provide 4" of Y-axis travel (±2" from the centerline) for off-center milling, drilling, and tapping. The machines are available in standard and Super Speed configurations.
The standard DS-30Y has a maximum cutting capacity of 18" x 23", and is equipped with a 12-station hybrid BOT/VDI turret. The A2-6 main spindle features an 8.3" hydraulic chuck, and is powered by a 30hp vector drive system that provides 300ft/lb of torque. The A2-5 secondary spindle also has an 8.3" hydraulic chuck, and is powered by a 20hp vector drive system that provides 135ft/lb of cutting torque. Both spindles turn to 4,000rpm, and have a 2.0" bar capacity. Rapids are 945ipm on the X- and Z-axes, and 500ipm on the Y-axis.
The Super Speed DS-30SSY has a maximum cutting capacity of 16" x 23", and is equipped with a 24-station hybrid BOT/VDI turret. The A2-6 main spindle features an 8.3" hydraulic chuck, and is powered by a 30hp vector drive system that provides 275ft/lb. of torque. The A2-5 secondary spindle also has an 8.3" hydraulic chuck, and is powered by a 20hp vector drive system that provides 110ft/lb of cutting torque. Both spindles turn to 4,800rpm, and have a 2.0" bar capacity. Rapids are 945ipm on the X-axis, 1,200ipm on the Z-axis, and 500ipm on the Y-axis.
Haas Automation DS-30 Series Turning Centers
Centers combine dual-spindle turning with Y-axis, C-axis, and live tooling to create “done-in-one” machining solutions for any shop.