
Northfield, Illinois – Bodine Electric Company’s variable speed AC motor speed control is simple to set up and operate, and it features an extremely rugged NEMA-4X / IP-65 enclosure. The control is ideal for stand-alone AC gearmotor applications that require controlled acceleration, adjustable operating speed or reverse operation.
The model 2999 Pacesetter AC speed control is designed to drive 230VAC, 50Hz or 60Hz, inverter-duty, 3-phase gearmotors and motors that are rated up to 1 HP (746 Watts). It operates from a single-phase, 115VAC or 230VAC line, and is housed in a NEMA-4X / IP-65 washdown and watertight aluminum die-cast enclosure. The control’s sine wave coded Pulse Width Modulated (PWM) output provides high motor efficiency and low noise. Linear acceleration and deceleration can be adjusted, making the control suitable for soft-start applications.
Easy to install and operate
Bodine’s model 2999 features a built-in Forward-Stop-Reverse switch, allowing dynamic braking for applications where the motor needs to be manually or infrequently reversed. User-friendly trimpots eliminate computer-like programming, and jumpers allow the drive to be used with a wide range of motors without recalibration. The control is factory-set for most applications and is GFCI compatible.
Features
The speed control allows for up to 200% starting torque, ensuring startup of high frictional loads. In addition, slip compensation with static auto-tune and boost circuitry provides excellent load regulation over a wide speed range. A run/fault relay signals if the drive is in stop mode, or a fault has occurred, and can turn the equipment off. Further system protection is provided by undervoltage and overvoltage circuitry, which shuts down the drive if the AC line input voltage goes above or below the operating range. Two built-in diagnostic LEDs mounted on the enclosure cover indicate “power on” and “drive status”. The control also includes a start/stop switch and a main speed potentiometer.
Source: Bodine Electric
Latest from Today's Medical Developments
- Eagle Machine, part of the YCM Alliance, announces Demo Days August 20-21
- Unlocking the power of direct torque control in cobots
- Shopfloor Connectivity Roundtable with Renishaw & SMW Autoblok
- Tekniplex Healthcare opens state-of-the-art facility in Madison
- Maximize efficiency with FAULHABER's latest motor technology
- Celebrating 35 years of leadership at Global Shop Solutions
- Platinum Tooling expands tool program for automatic lathes
- #68 Manufacturing Matters - Machine Tool Builders Roundtable