
MIT Department of Mechanical Engineering
Many people with diabetes need to inject themselves with insulin before consuming a meal. This time-consuming process often requires estimating the carbohydrate content of the meal, drawing blood to measure blood glucose levels, and then calculating and delivering the correct insulin dose.
The steps typically must be repeated for every meal, making it difficult for many patients with diabetes to stick with their treatment regimen. A team of MIT researchers came up with a new approach to streamline the process and help patients maintain healthy glucose levels.
“Any intervention that makes it easier for patients to receive therapy can have an enormous impact, because there are multiple barriers that have to do with time, inconvenience, dexterity, or learning and training,” says Giovanni Traverso, the Karl van Tassel Career Development Assistant Professor of Mechanical Engineering at MIT and a gastroenterologist at Brigham and Women’s Hospital. “If we're able to overcome those barriers through the implementation of new engineering solutions, it will make it easier for patients to receive that therapy.”
Traverso and his colleagues designed two different devices that simplify calculating and injecting the correct dose of insulin. One combines many of the existing steps into a single device and could be used in patients soon. Their second prototype incorporates flexible electronics onto the surface of a needle so that the blood measurement and insulin delivery can happen through the same needle, making managing diabetes more streamlined.
All-in-one device
Diabetes affects 34 million people in the United States and more than 400 million people worldwide. Diabetic patients use two types of insulin to control their blood sugar levels: long-acting insulin, helping control glucose levels over a 24-hour period, and short-acting insulin injected at mealtimes. Patients first measure their blood glucose levels with a glucose meter, which requires pricking their finger to draw blood and placing a drop of blood onto a test strip. They must also estimate how many carbohydrates are in their meal and combine this information with their blood glucose levels to calculate and inject the proper insulin dose.
“Every day, many patients do this complicated procedure at least three times,” MIT postdoc Hen-Wei Huang says. “The main goal of this project is to try to facilitate all of these complex procedures and to eliminate the requirement for multiple devices. We also used a smartphone camera and deep learning to create an app that identifies and quantifies food content, which can aid in carbohydrate counting.”
The research team devised two different types of “all-in-one” devices incorporate the new smartphone app. Patients take a picture of the food, and the app can then estimate the volume of food and the amount of carbohydrates, based on nutrient information from a USDA database.
The first device the researchers designed consolidates many of the existing tools that patients use now, including a lancet for drawing blood and glucose test strips. Once the blood glucose measurement is taken, the device conveys the information to the smartphone app via Bluetooth, and the app calculates the correct insulin dose. The device also includes a needle that injects the correct amount of insulin.
“What our device is doing is automating the procedures to prick the skin, collect the blood, calculate the glucose level, and do the computation and insulin injection,” Huang says. “The patient no longer needs a separate lancing device, glucose meter, and insulin pen.”
Many of the components in this device are already FDA-approved, but the device has not been tested in human patients yet. Tests in pigs showed that the system could accurately measure glucose levels and dispense insulin.
A single jab
For their second device, the researchers wanted to come up with a system that would require just one needle prick. They designed a novel glucose sensor that could be incorporated into the same needle used for insulin injection.
Sponsored Content
Screen and density separate your B-line with one machine!
The multi-functional SUB-PAN FREE® TAPER-SLOT® Screen DENSE-OUT® Combo saves valuable space. It provides two processes in a single machine with screening and density separation for up to three fractions. The flow of material begins on our rugged TAPER-SLOT® Screens for size separation and then over DENSE-OUT® air knives to separate by density.
Sponsored Content
Screen and density separate your B-line with one machine!
The multi-functional SUB-PAN FREE® TAPER-SLOT® Screen DENSE-OUT® Combo saves valuable space. It provides two processes in a single machine with screening and density separation for up to three fractions. The flow of material begins on our rugged TAPER-SLOT® Screens for size separation and then over DENSE-OUT® air knives to separate by density.
Sponsored Content
Screen and density separate your B-line with one machine!
The multi-functional SUB-PAN FREE® TAPER-SLOT® Screen DENSE-OUT® Combo saves valuable space. It provides two processes in a single machine with screening and density separation for up to three fractions. The flow of material begins on our rugged TAPER-SLOT® Screens for size separation and then over DENSE-OUT® air knives to separate by density.
Sponsored Content
Screen and density separate your B-line with one machine!
The multi-functional SUB-PAN FREE® TAPER-SLOT® Screen DENSE-OUT® Combo saves valuable space. It provides two processes in a single machine with screening and density separation for up to three fractions. The flow of material begins on our rugged TAPER-SLOT® Screens for size separation and then over DENSE-OUT® air knives to separate by density.
Sponsored Content
Screen and density separate your B-line with one machine!
The multi-functional SUB-PAN FREE® TAPER-SLOT® Screen DENSE-OUT® Combo saves valuable space. It provides two processes in a single machine with screening and density separation for up to three fractions. The flow of material begins on our rugged TAPER-SLOT® Screens for size separation and then over DENSE-OUT® air knives to separate by density.
“The idea would be that if we can integrate the glucose sensor directly onto the surface of the insulin delivery needle, we would only need one stick for the patient, which minimizes pain and also makes the whole process easier to administer,” MIT postdoc Sean You says.
The researchers designed a flexible electronic sensor attached to the needle and measures glucose levels in the interstitial fluid, just below the surface of the skin. Once the needle penetrates the skin, it takes between five and 10 seconds to measure the glucose levels. This information is transmitted to the smartphone app, calculating the insulin dose and delivers it through the inserted needle.
In tests in the pigs, the researchers showed they could accurately measure glucose levels with this system, and that glucose levels dropped after insulin injection.
Because this device uses a novel type of glucose sensor, the researchers expect it’ll require further development to get to a point where it could be tested in patients. They have filed for patents on both systems described in the new study and hope to work with companies to further develop them.
Get curated news on YOUR industry.
Enter your email to receive our newsletters.Latest from Today's Medical Developments
- Transform What’s Possible with the Okuma MULTUS U3000
- Okuma: Extraordinary Starts Where Limits End
- Are new medical procedures patentable?
- Caltech's smart capsule to study the health of the GI tract
- Unlocking stronger silicone adhesives for 3D printing
- Verisurf announces support for new Renishaw Equator-X
- Experience advanced machining at Mazak's DISCOVER 2025 event
- Renishaw smartphone app for the QC20 ballbar