Samchully Workholding, Inc. of Irvine, California will exhibit at Houstex 2013 for the first time since founding its California-based sales and technical support center in January 2010. Samchully Workholding, Inc. will proudly showcase a full-range of premium workholding solutions including application chucks, standard chucks, rotary cylinders, vises, steady rests, and rotary tables.
Samchully will feature the MCA is a 3-jaw stationary pneumatic chuck designed to hold round workpieces in a machining center or mounted on a tombstone. The most efficient way to hold round workpieces in a milling machine is with a round chuck. The MCA is a power chuck designed for this type of application, available in 4”, 6”, 8” and 10” sizes.
The MCA can be used with standard serrated soft or hard jaws or can be fitted with application jaws as required.
There are threaded holes on the face of the chuck for mounting locators or fixtures.
The MCA has a standard safety valve system that will prevent workpiece release in the case of a failure of the pneumatic system.
The MCA has a small through hole that can be used for an air blast for clearing chips off the workpiece.
Standard shop air pressure is required to operate the MCA.
The MCA can be installed on a milling machine and operated separately or multiple chucks can be mounted on a plate and actuated together.
Samchully Workholding, Inc. leverages a broad range of complement products to provide full turn-key custom solutions. The ability to single source the entire solutions ensures customers optimal compatibility, and unsurpassed quality control.